Sistema de presentación y seguridad
Con detección antirrobo, funciona con baterías.
Diseño atractivo
Soporte magnético para presentar el GSM bien posicionado en el expositor.
Incorpora un sensor de alarma flexible que se activa al quitar el soporte, acoplado al GSM.
Conexión de carga, sale del soporte y enchufa en el GSM.
La alarma salta al quitar la conexión de carga.
Control de sabotaje por cortocircuito y por corte de cable
Fácil de manejar.
Producto de diseño propio
Esta unidad cumple con todos los requisitos mencionados. El diseño es una solución económica que aplica una tecnología de interfaz única en el mundo para crear una alarma entre un cargador y cualquier unidad a cargar en el momento de ser el objetivo de un ladrón.
|
The unit will have the following features: |
|
Housing : 93 x 66 x 28 mm |
|
PCB : SMD technology |
|
Sounder: Piezo buzzer >100 dB @ 30 cm, modulated beep |
|
Input : 2.0 and 3.5 mm diameter power plug from GSM charger |
|
Output : 2 x RJ10 plug for securing and charging the GSM |
|
Indicator: red LED, activated in case of alarm
green LED, indicating presence of connected charger |
Each housing will contain a twin of units to secure and charge two GSM’s. The standard phone charger, supplied with the GSM on display (with 2.0 or 3.5 mm plug) will be used to power the units independently. In case of removal of the sensor or/and the power plug on the GSM, the buzzer sounds and the LED lights. The unit is equipped with an automatic reset, to cancel the alarm or reset the central unit. Therefore, a key switch or wireless remote is not required.
If the cause of the alarm cannot be solved immediately as would be required within any store environment, the connection to the charger must be interrupted. This has to take place inside or behind the display, where our unit has to be placed. The LED indicator will show which unit and which of its two channels has been activated.
The unit will not be influenced by transmitting or receiving signals from the GSM and operates irrespective of whether it is in ON or OFF mode.
The cable between each unit and the GSM involved can be a coiled telephone cable, fitted to the holder, fitted to the GSM. The holder has a LED indicator as well which lights in case the alarm is triggered, independent of its cause. Further, we can supply an automatic recoiler which retracts the smooth flat cable inside the display once the consumer puts the GSM back on the magnetic display holder after examination.